Details
Features
- A super-small, lightweight built-in AC power supply is great for cramped pit spaces, and easy portability.
- Fully adjustable charge currents from 100mA to 7 amps, with an auto-trickle function for NiCd and NiMH packs.
- A precise constant-current / constant-voltage charge algorithm safely fills lithium-polymer (LiPo), lithium-ion (Li-Ion), or lithium ferrite-phosphate (LiFe) batteries!
- A custom peak detection system loads NiCd and NiMH batteries full of power. Peak sensitivity can be adjusted to tailor the charger to the battery.
- Pushbutton controls and audible tones make for easy set-up and control.
- Configure up to 10 batteries in memory for instant, easy recall and set-up.
- A built-in cooling fan keeps components cool and extends life of charger.
- A backup safety timer automatically stops charge to prevent accidental battery overcharge.
- Large alligator clips on the DC input easily connect to most 12V DC power sources.
- Banana jacks on the output allow for connection with many commonly found charge adapters. An adapter with standard plug is included.
Specifications
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 1-8 NiCd or NiMH cells (1.2-9.6V) / 1-3 LiPo, Li-Ion, or LiFe cells (3.7-11.1V)
Battery capacity range: 50-9900mAh
Fast charge current: 0.1-7.0A linear, adjustable (AC 50W, DC 70W, 2C limit for lithiums)
Fast charge termination: peak detection for NiCd/MH, CC/CV for lithiums
Fast charge safety timer: off-300 minutes
NiCd/MH peak sensitivity: 3-20mV adjustable
NiCd/MH trickle charge curent: auto mode (1/20 fast charge setting), or manual set 0-250mA
Controls: 4 pushbuttons
Battery memories: 10
Display type: 2x8 reversed LCD with backlight
Setup tones: on / off
Audible melodies: 5
Output connection: banana jacks (includes standard adapter)*
Protective devices: solid-state reverse polarity and current overload
Case size: 6.0 x 5.28 x 1.69” (153 x 134 x 43 mm)
Weight: 23.5 oz
- A super-small, lightweight built-in AC power supply is great for cramped pit spaces, and easy portability.
- Fully adjustable charge currents from 100mA to 7 amps, with an auto-trickle function for NiCd and NiMH packs.
- A precise constant-current / constant-voltage charge algorithm safely fills lithium-polymer (LiPo), lithium-ion (Li-Ion), or lithium ferrite-phosphate (LiFe) batteries!
- A custom peak detection system loads NiCd and NiMH batteries full of power. Peak sensitivity can be adjusted to tailor the charger to the battery.
- Pushbutton controls and audible tones make for easy set-up and control.
- Configure up to 10 batteries in memory for instant, easy recall and set-up.
- A built-in cooling fan keeps components cool and extends life of charger.
- A backup safety timer automatically stops charge to prevent accidental battery overcharge.
- Large alligator clips on the DC input easily connect to most 12V DC power sources.
- Banana jacks on the output allow for connection with many commonly found charge adapters. An adapter with standard plug is included.
Specifications
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 1-8 NiCd or NiMH cells (1.2-9.6V) / 1-3 LiPo, Li-Ion, or LiFe cells (3.7-11.1V)
Battery capacity range: 50-9900mAh
Fast charge current: 0.1-7.0A linear, adjustable (AC 50W, DC 70W, 2C limit for lithiums)
Fast charge termination: peak detection for NiCd/MH, CC/CV for lithiums
Fast charge safety timer: off-300 minutes
NiCd/MH peak sensitivity: 3-20mV adjustable
NiCd/MH trickle charge curent: auto mode (1/20 fast charge setting), or manual set 0-250mA
Controls: 4 pushbuttons
Battery memories: 10
Display type: 2x8 reversed LCD with backlight
Setup tones: on / off
Audible melodies: 5
Output connection: banana jacks (includes standard adapter)*
Protective devices: solid-state reverse polarity and current overload
Case size: 6.0 x 5.28 x 1.69” (153 x 134 x 43 mm)
Weight: 23.5 oz
Write Your Own Review
Categories
My Cart
You have no items in your shopping cart.
Newsletter
