7C 7-Channel 2.4GHz FASST Heli Radio Tx/Rx only by Futaba

7C System Specifics:

- Available with 4 S3152 digital high-torque servos (FUTK7000/7001); 4 S3004 ball bearing servos (FUTK7002); or 4 S3001 ball bearing servos (FUTK7003)
- Dial 'n Key programming
- Airplane/heli software
- Assignable switches/functions
- Up/down timer
- Mode 1-4 selectable (modes 3 and 4 available via transmitter software)
- Large 72 x 32 LCD screen with adjustable contrast
- 10-model memory
- 6-character model naming
- Digital trims, trim memory, EPA, sub-trims and servo reversing (all channels)
- Dual/Triple rates* (aileron/elevator/rudder)
- Exponential (aileron/elevator/rudder)
- Adjustable throttle cut
- Fail-safe
- NT8S600B 600mAh Tx NiCd w/dual-output charger
- Trainer system (cord required)
- Flap switch
- Retract switch
- Variable rate knob (channel 6)

Helicopter Advanced Menu:

- Governor select makes it possible to match rpm/blade speed to maneuvers
- Swash to throttle mixing helps heli pilots keep their rpm steady
- 3 programmable mixes
- Throttle curve (5-point normal, idle up 1 & 2)
- Pitch curve (5-point normal, idle up 1 & 2)
- Revo mixing
- Gyro mixing
- Hovering throttle
- Hovering pitch
- Throttle hold
- Trim offset
- 6 swash plate set-ups (5 CCPM options)

Specifications:
Current Drain: 170mA

Receiver Specifications:
Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case

*No servos included with this model