Details
Features
- Special mixing includes 4WS for crawlers or brake mixing on 1/5 scale requiring front and rear brakes
- Steering/Throttle/CH3 and CH4 servo reversing and end point adjustments
- ABS braking with fast, mid and low pulses - Channel 4 neutral trim
- Ten model memory with 3-character model naming and model reset - Channel 3 switching
- Channel 4 neutral trim
- Steering dual rate lever
- Transmitter low battery alarm when voltage drops below 4.2V
- Internal transmitter antenna
- One year limited warranty through manufacturer beginning at date of purchase
Includes:
- Futaba 3PL 2.4GHz FHSS Transmitter with R2004GF 4-Channel Receiver
- On/off switch
- Small screwdriver
- Instruction manual
Requires:
- AA Cells: Four for transmitter
- Servos of modeler's choice
Transmitter Specifications
- FHSS Wheel Type 3+1 Channel
- Power Requirement: Four AA cells
- Current Drain: 100mA or less
Receiver Specifications
- Power Requirement: 4.8V or 6V shared with servos
- Current Drain: 30mA at no signal
- Size: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
- Weight: 0.49oz (14g)
- Special mixing includes 4WS for crawlers or brake mixing on 1/5 scale requiring front and rear brakes
- Steering/Throttle/CH3 and CH4 servo reversing and end point adjustments
- ABS braking with fast, mid and low pulses - Channel 4 neutral trim
- Ten model memory with 3-character model naming and model reset - Channel 3 switching
- Channel 4 neutral trim
- Steering dual rate lever
- Transmitter low battery alarm when voltage drops below 4.2V
- Internal transmitter antenna
- One year limited warranty through manufacturer beginning at date of purchase
Includes:
- Futaba 3PL 2.4GHz FHSS Transmitter with R2004GF 4-Channel Receiver
- On/off switch
- Small screwdriver
- Instruction manual
Requires:
- AA Cells: Four for transmitter
- Servos of modeler's choice
Transmitter Specifications
- FHSS Wheel Type 3+1 Channel
- Power Requirement: Four AA cells
- Current Drain: 100mA or less
Receiver Specifications
- Power Requirement: 4.8V or 6V shared with servos
- Current Drain: 30mA at no signal
- Size: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
- Weight: 0.49oz (14g)



